Maguire Iron Company LLC

658 Ring Handle

  

 

Installed in "Position A."

 

Installed in "Position B."

 

Grid squares in photos of articles are 1/2" x 1/2" (13mm x 13mm).

658 Ring Handle

"Position A" Backplate Diameter 8" (203mm)

"Position B" Backplate 6" x 6" (152mm x 152mm)

Ring 5" x 4-1/2" (128mm x 114mm) Width x Height

Projection 1-5/8" (41mm)

When installing this handle with either a mortice latch or mortice lock, we recommend adding article #M4-8 Installation of Stronger Springs to compensate for the heavy weight of the ring.

 

Locking Function:

Passage Function:

"Position A": No Mortice Lock available. Consider installing a separate lock above or below the ring handle.

"Position B": Use our M349 Mortice Lock with 5" (127mm) backset. Trim keyhole with our 6001 Keyhole Escutcheon.

Choose a Mortice Latch: M492 or M500.

Ring handles rotate freely (are not spring-loaded) and are sold individually. Each handle is provided with mounting screws and a 3-inch-long (76mm) spindle for use with doors/gates up to 1-3/4 inches (44mm) thick. A longer spindle, purchased separately, will be required for a thicker door/gate. Please specify door/gate thickness when ordering.